Aurora
Our Products
Aurora Partitioning offer the AP25, AP54 and AP100 glazing systems. All Aurora systems have been acoustically tested in the UK in an accredited UKAS test centre. We have slim profiles to achieve minimalist aesthetics and have deflection head channels for +/-25mm available on all systems. Each system has an accompanying door frame designed with rigidity and speed of installation being at the forefront of design. All of our systems are fully demountable and can be relocated in the office/workplace to suit the client’s needs as and when they may decide on reconfiguring their staff environment.

What Makes Aurora Products Special

Aurora products are designed to accommodate glass sizes of 10mm to 12.8mm using the supplied Q-Lon acoustic seals.

All our products have been designed with the fixer in mind with speed of installation for both aluminium and glass as a priority. Profiles are delivered to site with glazing seals pre-inserted in our workshop saving valuable time on site. Our bespoke door frame brackets and pre-drilled profiles make frame installation fast, effortless and precise.

All products are processed in-house using our own machinery with frames cut to any door width required and hinges/strike plates milled to any position needed. We stock a limited number of all products with many that can be sent out for next day delivery in standard RAL colours 9010 (white), 9005 (black) and 9006 (grey).

All components are safely packaged and delivered to site by Aurora transport.

PREMIUM GLAZING PRODUCTS
WITH A MINIMALIST DESIGN

AP25 Single Glazed

AP25 is a modern slimline aluminium glazing system comprising of a “1-part” section for use as a head channel and for wall abutments which measures 25mm wide x 25mm high and a “2-part” (chair and bead) section intended for use as a base channel and for wall abutments where a removable bead is needed which also measures 25mm wide x 25mm high.
Head deflection of +/-25mm is achieved using our male/female deflection set or a deflection of +/-20mm is achieved using our 50mm deep “1-part” head channel, both of which collaborate with all other components.
The AP25 single-glazed system has been tested for acoustic performance in a UKAS accredited laboratory and can achieve up to Rw38dB using 12.8mm acoustic laminated glass.  Full test reports available on request.

Banded Glazing

Banded glazing is achieved by using our specially extruded aluminium sections which can be cut & installed to any desired layout
and finishes just under flush to the trackwork optimising aesthetics.
Our banding measures 25mm wide and is bonded to both sides of glass in the AP25 system for a sleek banded screen. We have a
custom box section that is bonded internally to the AP54 system and works in conjunction with our bars to create fully banded screen with a framed appearance.
To truly complement any banded screen you need a door to match. This is achieved using our ultra-slim ‘U’ channel to frame the
door and our ultra-slim 25mm flat bar to continue the banding design through the whole screen and colour matched ironmongery
blends in nicely.

AP54 Double Glazed

AP54 is a modern slimline aluminium glazing system comprising of a “1-part” section for use as a head channel and for wall abutments which measures 54mm wide x 25mm high and a “2-part” (chair and bead) section intended for use as a base channel and for wall abutments where a removable bead is needed which also measures 54mm wide x 25mm high.
Head deflection of +/-25mm is achieved using our male/female deflection set or a deflection of +/-20mm is achieved using our 50mm deep “1-part” head channel, both of which collaborate with all other components.
This system can also be used to create customised ‘tech-panels’ using a variety of materials and has a minimum 13mm cavity
between the glass/boards.
The AP54 double-glazed system has been tested for acoustic performance in a UKAS accredited laboratory and can achieve up to Rw42dB using 2 x layers of 12.8mm acoustic laminated glass.  Full test reports available on request.

Door Frames

All our glazing systems come with a corresponding door frame in keeping with the modern slimline design. Although slim in
appearance, our frames have been designed with robustness being one of the principle objectives and can accommodate most
door types up to 44mm thick or 54mm rebated.

Designed with the fixer in mind, our frames are incredibly quick & easy to install and each door frame is mitre cut in our workshop to any door size before sending to site.

With pre-drilled, counter-sunk holes in the top face of the head and internal locating mitre brackets, you will achieve a flawless joint every time. The bespoke steel fixing plate for the bottom of door legs are designed not to interfere with floor springs if being used.

Our slimline door frame has been tested for acoustic performance in a UKAS accredited laboratory and can achieve up to Rw33dB
using a 12mm CFT frameless glass door and acoustic seal.  Full test reports available on request.

AP100 Double Glazed

AP100 is a modern slimline aluminium glazing system comprising of a “1-part” section for use as a head channel and for wall abutments which measures 100mm wide x 25mm high and a “2-part” (chair and bead) section intended for use as a base channel and for wall abutments where a removable bead is needed which also measures 100mm wide x 25mm high. Both sections have a removable centre aluminium infill to allow access for fixing which can easily be replaced if damaged on site by other trades.
Head deflection of +/-25mm is achieved using our male/female deflection set or a deflection of +/-20mm is achieved using our 50mm deep “1-part” head channel, both of which collaborate with all other components.
This system can also be used to create customised ‘tech-panels’ using a variety of materials and has a minimum 59mm cavity
between the glass/boards.
The AP100 double-glazed system has been tested for acoustic performance in a UKAS accredited laboratory and can achieve up
to Rw51dB using 2 x layers of 12.8mm acoustic laminated glass.  Full test reports available on request.

Amundi Office 5
Curved Screens

Aurora Partitioning offer curved glazing which adds a very impressive feature to any workplace. We can curve the AP25 & AP54
systems to your desired radius and our in-house design team can provide detailed CAD drawings for each screen.

Our curved screens come with a variety of finishes and glass types available so we know our client’s will find the right option to suit their needs.

We can also curve all our banding products, enabling our curved screens to blend in effortlessly with our straight banded screens.

Aurora Logo

1 Millside Industrial Estate
Southmill Road
Bishop's Stortford
CM23 3DP

T: 01279 755756
E: info@aurorapartitioning.com

REQUEST A BROCHURE

Please email us your details and we’ll send you a brochure

Linkedin Instagram Twitter

CHAS Logo
Aurora A